Select your language
Featured Products
Cronotermostato Wi-Fi MFCB per fancoil 2/4 tubi controllo a 3 velocita e a 0-10 Vdc e porta di comunicazione slave ModBus, Bianco
Cronotermostato Wi-Fi MFCB che gestisce l'impianto di riscaldamento a fancoil 2/4 tubi con gestione della ventola sia a 3 velocità 230 Vac sia a 0-10 Vdc. Colore Nero
A charging station for electric vehicles, with a power of 7 kW, and a Modbus communication interface. The device can also be controlled via the MyVirtuoso Home smart home system.
Modulating Wi-Fi chronothermostat (OpenTherm) simple to use, compatible with OpenTherm boilers and always connected
HUB for managing MyVirtuoso Home devices and for data collection and analysis
_150x150.png)
Z-Wave interface/actuator for ModBus PV inverters, electric smart meter charging stations
The interface monitors the operation of PV inverters, charging stations and electric meters that support the Modbus protocol
Top ten Products
Plastic radiator valve adapter to fit M30 digital thermostatic head to Caleffi valve.
TTD101: stand alone digital thermostatic head designed to detect the room temperature and automatically regulate the radiator water flow. Manual programming or via TTD USB Programmer cable (not included).
Plastic radiator valve adapter to fit M30 digital thermostatic head to M26 Pintossi valve.
Adapter for coupling thermostatic and electrothermal controls with GIACOMINI valves
Plastic radiator valve adapter to fit M30 digital thermostatic head to M28 Herz valve.
Plastic radiator valve adapter to fit M30 digital thermostatic head to F.A.R. valve.
Products
Adattatore Modbus RS485 RTU a USB per applicazioni master/slave
TTD101 Pack 5: testine termostatiche digitali programmabili stand alone progettate per rilevare la temperatura della/e stanza e regolare in automatico il flusso d'acqua dei radiatori. Programmazione manuale o tramite cavetto TTD USB Programmer (non incluso).
Repeat Z-Wave communication signal between HUB and devices. Detect room temperature and humidity
_150x150.png)
La presa smart Wi-Fi con spina Schuko è un dispositivo progettato per attivare l'accensione/spegnimento del carico collegato e di rilevarne il consumo in tempo reale. Compatibile con la App Smart Life.
Ultrasonic Heat/Cool meter DN15 average flow rate 1.5 m3/h with pulse interface
Heat/Cool meters are devices designed to detect the thermal energy supplied by a source, measuring the temperature variation between the system inlet and outlet.
_150x150.png)
Mini MQTT energy consumption and photovoltaic production meter, programming via cloud platform
The wall display that allows you to use the App to control all the devices, scenarios and automations set
The interface monitors the operation of modulating boilers that support the OpenTherm protocol
Dry contact Wi-Fi chronothermostat (NO/NC), simple to use, compatible with all dual mode boilers and heat pumps
6_150x150.png)
Mini energy consumption and photovoltaic production meter, programming via cloud platform, three-phase MQTT
Alimentatore per il collegamento a rete di dispositivi alimentati con 2 batterie formato AA
Dry contact Wi-Fi chronothermostat (NO/NC) simple to use, compatible with all boilers and always connected
NB-IoT energy consumption meter, programming via cloud platform
Alimentatore per il collegamento a rete di dispositivi alimentati con 2 batterie formato AAA
_150x150.png)
Energy consumption meter, programming via MyVirtuoso Home App or cloud platform
_150x150.png)
Temperature and humidity sensor with display, setpoint adjustment, fan and heat/cold management
The temperature and humidity sensor with display and setpoint adjustment is a battery-operated device designed for managing water heating systems and fans
Alimentatore per il collegamento a rete di dispositivi alimentati con 3 batterie formato AA
Built-in thermostat for fancoil with 4 pipes and 0-10 Vdc fan with Modbus
Model: 01334-6090-00
Installation: built-in
System type: fan coil
Systems control: 4 pipes
Fan speed control: 0-10 Vdc
_150x150.png)
Power meter -48 Vdc con TA MyPM-48MBTA con interfaccia ModBus per sistemi di telecomunicazioni
8 N/O and N/C output module, 2 inputs for temperature sensors, 2 analogue outputs with 230Vac power supply
Module with 8 outputs for dry contact zone valves (NO/NC) ideal for managing hydronic heating and cooling systems and controlling the thermovalves of underfloor systems.
Alimentatore per il collegamento a rete dei misuratori con sensore LED e magnetico/ottico
External 10K NTC sensor with 15m cable for temperature measurement.
The MyVirtuoso Home remote control button can be programmed to activate, by pressing the appropriate button, the operation of the device it is associated with (turning lights on and off, opening or closing motorized gates and blinds, etc.). The device is especially useful for alarm systems.
Filtri
EcoDHOME.com powered by
SmartDHOME SRL
V.le Longarone, 35
20058 Zibido San Giacomo (MI)
800 020 346