Home and Building Automation MyVirtuoso Home

Z-Wave signal repeater with temperature and humidity measurement

Repeat Z-Wave communication signal between HUB and devices. Detect room temperature and humidity

Z-Wave interface/actuator for ModBus PV inverters, electric smart meter charging stations

The interface monitors the operation of PV inverters, charging stations and electric meters that support the Modbus protocol

Wi-Fi room thermostat for 4-pipe fan coils with 3-speed fan adjustment and valve management

Wi-Fi room thermostat for 4-pipe fan coil, 3-speed 230 Vac fan regulation and valve management

10'' wall display

The wall display that allows you to use the App to control all the devices, scenarios and automations set

Alimentatore 5 Vdc 4,0A spina EU terminato Micro USB-C

Alimentatore da incasso 5 Vdc 0,5A

Alimentatore da incasso 5 Vdc 1A

Alimentatore da incasso 5 Vdc 1A terminato micro USB-C

Alimentatore da incasso 12 Vdc 0,5A

HUB MyVirtuoso Home ES

HUB for managing MyVirtuoso Home devices and for data collection and analysis

Actuator with clean contact NO/NC

Actuator with clean contact to turn on or off all users equipped with a clean contact, such as boilers, heat pumps, fan coils, air conditioners, etc.

Single-phase energy production and consumption meter

Measures inductively, therefore without modifying the existing electrical system, the energy detected (consumed or produced).

Alarm and strobe light

Combined with detection sensors, it signals any alarms. Equipped with visual and sound signal and internal battery.

MyOT interface/actuator for OpenTherm modulating boilers

The interface monitors the operation of modulating boilers that support the OpenTherm protocol

Router Ethernet/Wi-Fi con modem 4G/LTE

Il nuovo router ideato da SmartDHOME consente agli utente di accedere alla connettività 4G/LTE per consentire il collegamento del sistema MyVirtuoso Home alle applicazioni cloud. Il dispositivo si presenta con un design elegante, compatto e completamente rivisitato.

HUB MyVirtuoso Home ES2 Edition with internal battery

HUB for managing MyVirtuoso Home devices and for data collection and analysis. With backup battery

Three-phase energy production and consumption meter

Measures inductively, therefore without modifying the existing electrical system, the energy detected (consumed or produced).

Internet Key 4G

It guarantees Internet connectivity in the absence of a Wi-Fi or Ethernet connection, allowing remote control from the App.

3 kW PV balancer control unit

Control unit that heats the resistance of a water accumulator depending on the energy available from the photovoltaic system

Z-Wave interface/actuator for thermoregulation systems, smart meters and ModBus sensors

The interface monitors the operation of thermoregulation systems, smart meters and sensors that support the Modbus protocol.

Outdoor alarm with PV panel

Outdoor siren with photovoltaic panel, designed to protect your home from attempted theft or tampering. Z-Wave certified, the device is compatible with the gateways of the MyVirtuoso Home home automation system.

IP 720P Wireless indoor camera

An elegant and modern indoor camera that adapts to any situation!

Built-in Switch and Power Meter

It activates and deactivates the users to which it is connected and measures consumption

Sensor for NO / NC and temperature contacts

Improves the functionality of any sensor with binary output (dry contact) and allows Z-Wave communication