Repeat Z-Wave communication signal between HUB and devices. Detect room temperature and humidity

The interface monitors the operation of thermoregulation systems, smart meters and sensors that support the Modbus protocol.

The WMTE-130 zone chronothermostat is designed to switch heating and cooling systems on and off. It has been developed to operate with the Comfort.me OMZ smart system for underfloor radiant heating installations and boilers with OpenTherm interface or systems with TA (room thermostat) input.

WMTE-1037 thermo-electric actuator for the management of hydronic and underfloor heating systems

The wireless LoRa module for Modbus devices allows the Modbus communication range to be extended up to 300 meters in open field.

Wi-Fi room thermostat for 4-pipe fan coil, 3-speed 230 Vac fan regulation and valve management

Wi-Fi room thermostat for 4-pipe fan coil, 3-speed 230 Vac fan regulation and valve management

Wi-Fi room thermostat for 2-pipe fan coil, 3-speed 230 Vac fan regulation and valve management

Wi-Fi room thermostat for 2-pipe fan coil, 3-speed fan regulation 0-10 Vdc and valve management

Dry contact Wi-Fi chronothermostat (NO/NC) simple to use, compatible with all boilers and always connected

Universal infrared remote control for managing air conditioners, heat pumps, and stoves.

Detects gas (methane/LPG/propane) and carbon monoxide (CO) with shut-off valve. Monitored via Smart Life App and certified according to EN 50291-1:2018 and EN 50194-1:2009 standards.

Detects gas (methane/LPG/propane) and carbon monoxide (CO). Monitored via Smart Life App and certified according to EN 50291-1:2018 and EN 50194-1:2009.

MyAngel CO₂: monitor della qualità dell’aria con sensore NDIR ad alta precisione per la rilevazione dei livelli di CO₂ (400–5000 ppm), temperatura e umidità. Attiva allarmi acustici, visivi e a vibrazione in caso di superamento soglia (1000 ppm). Controllo remoto tramite Wi-Fi e app Smart Life per iOS/Android. Installazione da tavolo o a parete. Alimentazione a batterie AA o rete 230V (alimentatore incluso).

Wi-Fi Chronothermostat MFCBW for 2/4-pipe fan coil systems, with 3-speed control and 0–10 Vdc output, featuring wireless control unit.

Wi-Fi Chronothermostat MFCB for 2/4-pipe fan coil systems, with 3-speed control and 0–10 Vdc output, ModBus slave communication port, Black.

Dry contact Wi-Fi chronothermostat (NO/NC), simple to use, compatible with all dual mode boilers and heat pumps

Detects carbon monoxide (CO). Monitored via Smart Life App and certified according to EN 50291-1:2018.

Wi-Fi actuator module with two 230 Vac UP/DOWN contacts for curtain/shutter motors (maximum current 3A per contact), compatible with the Smart Life app.

Wi-Fi actuator module with two 230 VAC contacts (maximum current 10A per contact), compatible with the Smart Life app.

Wi-Fi actuator module with one NO/NC contact (maximum current 5A), compatible with Smart Life app.

Wi-Fi actuator module with one 230 VAC contact (maximum current 10A), compatible with the Smart Life app.

The smart Wi-Fi socket with Schuko plug is a device designed to switch the connected load on and off and to monitor its real-time power consumption. Compatible with the Smart Life app.

A charging station for electric vehicles with a power of 22 kW and a Modbus communication interface