HUB for managing MyVirtuoso Home devices and for data collection and analysis
I termostati della linea Comfort.me MFC2 sono adatti a contesti residenziali e lavorativi in cui è necessario un controllo accurato dell’impianto di riscaldamento e raffrescamento attraverso un terminale fancoil.
Il design moderno e la possibilità di controllo da remoto permettono al termostato di essere un’ottima soluzione per un accurato controllo anche da distanza dell’impianto termico.
MyGMS is the device designed for gas supply services where an hourly transfer of consumption is required.
The interface monitors the operation of PV inverters, charging stations and electric meters that support the Modbus protocol
Modulating Wi-Fi chronothermostat (OpenTherm) simple to use, compatible with OpenTherm boilers and always connected
Plastic radiator valve adapter to fit M30 digital thermostatic head to Caleffi valve.
TTD101: stand alone digital thermostatic head designed to detect the room temperature and automatically regulate the radiator water flow. Manual programming or via TTD USB Programmer cable (not included).
Adapter for coupling thermostatic and electrothermal controls with GIACOMINI valves
Plastic radiator valve adapter to fit M30 digital thermostatic head to M26 Pintossi valve.
Plastic radiator valve adapter to fit M30 digital thermostatic head to M28 Herz valve.
Plastic radiator valve adapter to fit M30 digital thermostatic head to F.A.R. valve.
The WMTE-1037 thermo electric actuator is the ideal solution for managing hydronic and underfloor heating systems.
Plastic radiator valve adapter to fit M30 digital thermostatic head to M32 valve.
La presa telecomandata Smart Start PSE100 è ideale per accendere o spegnere da remoto le utenze collegate grazie all'utilizzo di un pratico telecomando (acquistabile separatamente).
L'attuatore da incasso Smart Start DSE500 è ideale per accendere o spegnere da remoto le linee elettriche collegate grazie all'utilizzo di un pratico telecomando DSE1000 (acquistabile separatamente).
Il telecomando DSE1000 è ideale per comandare da remoto le prese e gli attuatori Smart Start ad esso collegati.
La presa conta energia Smart Start PSE1000 è ideale per tenere costantemente sotto controllo i consumi delle utenze ad essa collegate.
Il sensore di presenza Smart Start DSE2000 è ideale per gestire l'accensione dell'impianto elettrico in base ai movimenti rilevati nell'ambiente.
You can programme TTD101 by hand or you can use our convenient programming stick to copy your personally specified heating and economy times onto all your EcoDHOME energy-saving radiator thermostats at your home which have a programming port in a matter of seconds.
Automatic radiator bleed valve. This kit consists on 5 pieces.
An elegant and modern indoor camera that adapts to any situation!
HD Wireless IP pivoting indoor camera, it supports TF memory.
NOT AVAILABLE AT THE MOMENT. ORDER NOW AND RECEIVE AS SOON AS AVAILABLE.
HD Wireless IP outdoor camera, it supports TF memory.
The receiver unit HCE-08 receives information from the WMTEs programmable thermostats and acts as an actuator, turning on and off solenoid valves and control devices for heating/cooling installations (boilers, fan coil units, convection heaters, air conditioners, etc.).
NOT AVAILABLE AT THE MOMENT. ORDER NOW AND RECEIVE AS SOON AS AVAILABLE.
Wall-mounted wireless thermostat WMTE-120, measures zone temperature and sends commands to power on/off the receiver control units.
Wall-mounted wireless thermostat WMTE-110, measures zone temperature and sends commands to power on/off the receiver control units.
NOT AVAILABLE AT THE MOMENT. ORDER NOW AND RECEIVE AS SOON AS AVAILABLE.
Wall-mounted wireless thermostat WMTE-120, measures zone temperature and sends commands to power on/off the receiver control units.
Wall-mounted wireless thermostat WMTE-110, measures zone temperature and sends commands to power on/off the receiver control units.
This starter pack consists of 3 TTD800 digital thermotatic heads and an HUB TTD5000.
This starter pack consists of 5 TTD800 digital thermotatic heads and an HUB TTD5000.
TTD800 digital thermostatic head allows to control the flow of water through the radiator which they are fitted to. If linked to a HUB TTD5000, it can be control with an APP.
HUB to connect TTD800 digital thermostatic heads to your home Wi-Fi
ON/OFF boiler actuator in combination with programmable digital thermostatic head kits with app
The more you buy, the more you save! The KIT of 3 digital thermostatic heads TTD101 helps you in the management of your radiators and in programming the temperature of your home. Not connectable to wireless thermostats.
Kit 5 Teste Termostatiche digitali progettate per rilevare la temperatura della stanza e regolare in automatico il flusso d'acqua del radiatore. Programmazione manuale.
EcoDHOME.com powered by
SmartDHOME SRL
V.le Longarone, 35
20058 Zibido San Giacomo (MI)
800 020 346