Once a TTD digital thermostatic head is installed onto a radiator, you can adjust the flow of hot water according to the temperature you want for a given room.
Thanks to the heads programme controls, you can set the ideal temperature for a certain time of day and / or week. Once you have defined on / off cycles and the desired temperature, the motor in the head will adjust the radiator valve to which it is connected, increasing or decreasing the flow of hot water according to the set temperature.
The Ecodhome TTD series of digital thermostatic heads reduce energy waste and improve comfort levels by setting the temperature level in each room according to need..
The TTD series of digital thermostatic heads can be attached to any radiator which has a thermostatic radiator valve fitted. These can easily be identified by removing the knob. If there is a spring loaded pin in the centre, then you have the correct type. If the radiator does not have a thermostatic valve, then you will have to replace it, in order to fit a digital head. Depending on the type of thermostatic valve you have / fit, you may need an adapter.
This is an independent control of individual radiators.
In accordance with the various temperatures and times set, the valves will be opened/closed as necessary. If a window is opened, the sensor will signal to the head to close off the valve, therefore avoiding unnecessary waste.
Here the thermostatic head used in this example:
This is a centralised control of radiators.
Where the radiator is behind furniture or in a confined space, it is advisable to use a separate thermostat. The EcoDHOME TTD2000 Thermostat and TTD150 Head Kit is perfect for these situations. In other words, you are removing the temperature measurement away from the radiator itself.
The temperature and times set on the TTD2000 wireless thermostat are sent to the individual heads to control their respective valves. When a window is opened, this is detected by the wireless thermostat, which in turn signals to the head to shut off the valve; thus avoiding any unnecessary waste.
Here the products used in this example:
Alcune valvole termostatizzabili*, che non hanno passo generico M30 x 1.5, richiedono un adattatore di raccordo per avvitare correttamente le testine termostatiche EcoDHOME.
* Sinceratevi che le vostre valvole siano termostatizzabili. I modelli più vecchi generalmente non lo sono e vanno dunque sostituiti.
MyVirtuoso Home
Digital Thermostatic Heads
Smart Thermostats
Energy Monitors